1.	What is OTX?
2.	How can I get updated drivers for my Odin cards?
3.	I have an OTX T1/E1/J1 card. What sequence of API functions should I use to perform board initialization, creation of logical device and also stop the driver?
4.	What is the warranty and repair policy for Odin products?
5.	How can I connect a Thor-8-PCI board to a Vidar-5x16-PCI DSP resource board?
6.	What causes the following message Error: "Mismatch between OTX Driver revision and OTX Library revision" when I try to run an application?
7.	Does OTX driver support SLC96 TR08 9-state signalling mode? If yes, how can i enable this logical device?
8.	Is there support for accessing the Data Link (DL) bits on the T1 span?
9.	Can I connect multiple OTX boards together?
10.	How can I use the OtxDrvWaitForSingleEvent(..) function to receive data from a RawData Reciever device?
11.	There are two dip-switches located on the back of the Thor-2-PCI. What are they used for?
12.	Should the serial numbers of card Thor-2-PCI and cards Vidar-5x4-ASM to coincide for their normal working?
13.	I use a Thor-2-ISA card. I am running Linux Redhat 6.2. Can I run Thor-2-ISA in Linux?
14.	I have a THOR-2-PCI card that I am trying to install under Redhat 7.2. Is the OTX Linux driver supported under RedHat 6.2 (kernel 2.4.x)?
15.	I use a Thor-2-PCI card and during the initial setup, I get the following messages: Errored second event Loss of Multiframe Alignment event What are they and how can I fix the problem?
16.	I bought a Thor-2-PCI card and found that some of the chips used are different (compared to another Thor-2-PCI card purchased earlier). Will this affect the way I access OTX API functions?
17.	I have installed a Thor-2-ISA card in a PC that runs Windows 98. After I installed Thor-2-ISA driver, I got the the following error message after pc boot up. The error is "A fatal exception 0E has occurred at 0028:C0051F96 in VXD VPICD(01) + 00001EA2. The current application will be terminated". Can you help me with this problem and what I should do to fix this?
18.	Do the OTX cards have software to support the SS7 protocol?
19.	I am using a Thor-2-PCMCIA card. What are the different clock settings available?
20.	How do you connect pipes from the E1/T1/J1 span to the H.100 bus on the OTX boards?
21.	I have two Thor-2-PCI cards. I use 2 loop cables to connect LI0 of one card to LI0 of another, and LI1 to LI1 of another. The follwing events happen periodically: From one card: 04-14 16:44:53.579 E1/T1[1] Event: E1: Errored second 04-14 16:44:53.579 E1/T1[1] Event: E1: Receive Slip Negative (1) 04-14 16:45:17.579 E1/T1[0] Event: T1: Errored Second 04-14 16:45:17.579 E1/T1[0] Event: T1: Receive Slip Negative (1) From the other: 04-14 16:45:39.863 E1/T1[1] Event: E1: Errored second 04-14 16:45:39.863 E1/T1[1] Event: E1: Receive Slip Positive (1) 04-14 16:45:55.863 E1/T1[0] Event: T1: Errored Second 04-14 16:45:55.863 E1/T1[0] Event: T1: Receive Slip Positive (1) What do these mean and how can I deal with it?
22.	What is the difference between a Thor-2-Pcmcia card and Thor-2-Pcmcia plus card?
23.	What BIOS settings must be disabled?