Technical Specifications

Board Connector:
One RJ-45 10/100 Ethernet connector
Four E1/T1 RJ-45 connectors (HAA-1082-2 only)
Serial port connector
USB connector

Data interface:
10/100 Ethernet interface
USB 2.0 interface
4 T1/J1 or E1 interfaces with software switchable line termination (High-Z, 75 Ohm and 100/120 Ohm) (HAA-1082-only)

T1/E1 Frame Formats (HAA-1082-2 only)
Doubleframe, CRC Multiframe (E1 mode)
F4, SF (or D4), ESF (or F24), SLC96 (T1/J1 mode)

T1/E1/J1 Line Codes (HAA-1082-2 only)
HDB3, B8ZS, AMI, AMI with ZCS

DSP core and ARM9 Resources
DSP Core: 4752 MIPS (C64x+)
ARM9 Core: 297 MHz

Memory:
256 MB SDRAM (shared by DSP and ARM9 cores)
128 MB Flash memory

Programming Interface:
OTX DSP API (for custom DSP core software)
OTX HW API (for controlling software)
Montavista Linux tools

Debugging Interface:
Serial port connection allows full access to ARM9 core

Physical Dimensions
5" x 7" (1.75" height). Key-hole mount on the back side

Power Requirements/Environmental Data:
Power is supplied via external power supply
Power consumption: TBD
Temperature: operating, 0o C to +50o C; non-operating, -40o C to +60o C
Humidity: operating, 5% to 80% RH (%relative humidity) at up to +30o C, and 5% to 30% RH above +30o C up to +50o C non-condensing; non-operating, 5% to 80% RH at up to +30o C, and 5% to 30% RH above +30o C up to +50o C non-condensing
Altitude: operating, up to 4,600 meters (15,333 feet); non-operating, up to 12,192 meters (50,000 feet)

Example Third Party Tools:
Texas Instruments Code Composer Studio.